As an Amazon Associate I earn from qualifying purchases.
AmicoPower #ad - The filter is located inside the machine with an automatic air control solenoid valve. Automatic compensation for voltage fluctuation, over-current protection, over-voltage protection, automatic temperature control, over-load protection, under-voltage protection, and fan dormancy.
Cuts stainless steel, notches, holes, mild steel, resulting in straight cuts, circles, copper, alloy steel, angles, slots, v-grooves, and other metal materials with ease, curves, aluminum, and many others in minutes.
It requires less work to produce an overall better result with a cleaner cut. Incorporates advanced igbt inverter technology with an excellent Arc stability. 100~250v wide voltage, 50~60hz, almost all of the voltage and frequency can be used. Quick setup: npt 1/4" industry type d coupler can connect easily with the pre-installed plug on the air compressor.
AmicoPower #ad - 60% duty cycle can ensure long-term and efficient cutting. The lightweight model design makes the machine very convenient to carry anywhere. Cut-50hf is an intelligent power supply system. Extending the power cord by 700 feet can also resist power fluctuations and cable attenuation; the machine can still work normally.
The cutting effect is very ideal and can finish the work effortlessly and quickly, regardless if the material is very rough, spray painted, rusty, dirty, etc. Stainless steel, aluminum and other conductive metals, v-grooves, and many others in minutes. Npt 1/4 inch industrial d-type coupler can easily and quickly connect to the air compressor.
The automatic selection function can automatically detect the input voltage, and the machine will automatically adjust it. Cut-50hf is designed with multiple safety and protection functions, over-current protection, plasma torch gun safety protection, over-heating protection, over-loading protection, such as automatic compensation for voltage fluctuations, etc. The fan with automatic temperature control allows the machine to run very quietly. Can cut up to 4/5 in.
AmicoPower #ad - It is designed for demanding industrial work and construction and simple tasks around houses. Cut-60hf is designed with multiple safety and protection functions, such as automatic compensation for voltage fluctuations, plasma torch gun safety protection, over-current protection, over-heating protection, over-loading protection, etc.
With less work, you can achieve better results overall with sharper cuts. Cut-60hf is an intelligent power supply system. It is fully suitable for difficult operations in construction sites, agricultural sites, ship docks, and relatively remote areas.
The automatic selection function can automatically detect the input voltage, so that you can easily use it in of 90V to 300V, and the machine will automatically adjust it. Extending the power cord by 700 feet can also resist power fluctuations and cable attenuation; the machine can still work normally. 80% duty cycle can ensure long-term and efficient cutting. The cutting effect is very ideal and can finish the work effortlessly and quickly, regardless if the material is very rough, rusty, greasy, dirty, etc.
AmicoPower #ad - Auto-voltage automatically adapts to 100-240V input power, plug adapters included. 50 amp digital air inverter plasma cutter handles cuts up to 1. 0". Less cleaning, and less fire hazard, maintenance, you have simply less overall work and a better, noxious gases, cleaner cut.
AmicoPower #ad - The cutting effect is very ideal and can finish the work effortlessly and quickly, etc. Apc-70hf is designed with multiple safety and protection functions, such as automatic compensation for voltage fluctuations, over-loading protection, plasma torch gun safety protection, over-heating protection, over-current protection, etc.
Extending the power cord by 700 feet can also resist power fluctuations and cable attenuation; the machine can still work normally. Apc-70hf can achieve perfect cutting, angles, alloy steel, notches, curves, aluminum alloy, copper, cast iron, slots, iron, and the strength of its components makes it a reliable work tool for professionals or individuals.
It is designed for demanding industrial work and construction and simple tasks around houses. Can cut up to 1. 2 in. It is fully suitable for difficult operations in construction sites, agricultural sites, ship docks, and relatively remote areas. The fan with automatic temperature control allows the machine to run very quietly. The lightweight model design makes the machine very convenient to carry anywhere.
AmicoPower #ad - Apc-80hf is an intelligent power supply system. Apc-80hf can achieve perfect cutting, pig iron, v-grooves, copper, circles, angles, cast iron, low-carbon steel, notches, alloy steel, curves, slots, resulting in straight cuts, and the strength of its components makes it a reliable work tool for professionals or individuals.
Can cut up to 1. 2 in. 80% duty cycle can ensure long-term and efficient cutting. The fan with automatic temperature control allows the machine to run very quietly. Extending the power cord by 700 feet can also resist power fluctuations and cable attenuation; the machine can still work normally.
It is designed for demanding industrial work and construction as well as simple tasks around houses. It can automatically detect the input voltage and automatically compensate the voltage, allowing you to use it easily at 200-250V. Apc-80hf is designed with multiple safety and protection functions, over-current protection, over-loading protection, plasma torch gun safety protection, such as automatic compensation for voltage fluctuations, over-heating protection, etc. Npt 1/4 inch industrial d-type coupler can easily and quickly connect to the air compressor.
AmicoPower #ad - 200-amp stick welder, e7014, professional manufacturing, compatible with all electrodes: E6010, built-in hot start, electrode anti-sticking, e6011, e7018, E6013, strong penetrating power, etc. The npt 1/4 inch industrial D-type coupler can be quickly and easily connected to the air compressor.
Intelligent power supply system, automatic detection of input voltage, automatic switching between 110V and 220V. It can weld 1/2 inch stainless steel, making the welding products extremely clean and perfect. It is the most efficient and multifunctional machine.
The automatic temperature control fan makes the machine run very quietly. The lightweight ergonomic design makes the machine very portable, and dock operations. All accessories and interfaces comply with American standards. With built-in thrust, and current intensity control functions, all tasks can be completed efficiently and easily.
AmicoPower #ad - The filter is located inside the machine with an automatic air control solenoid valve. Can cut up to 3/5 in. Construction, and is designed for both demanding industrial work, including home and hobby use.95-260v wide voltage, 50/60hz, almost all of the voltage and frequency can be used.
It requires less work to produce an overall better result with a cleaner cut. The torch design provides a sure and comfortable grip made with heat and impact resistant material.
Automatic compensation for voltage fluctuation, over-voltage protection, under-voltage protection, over-load protection, automatic temperature control, over-current protection, Power cords extend to 700 feet still can use normally.
AmicoPower #ad - Cut-40 is an intelligent power supply system; the automatic selection function can automatically detect the input voltage and adjust it. Cut-40 incorporates the most advanced igbt inverter technology, resulting in excellent arc stability, the cutting effect is very ideal.
The fan with automatic temperature control allows the machine to run very quietly. Npt 1/4 inch industrial D-type coupler can easily and quickly connect to the air compressor. The lightweight model design makes the machine very convenient to carry anywhere. Cut-40 can achieve perfect cutting, alloy steel, iron, low-carbon steel, pig iron, and the strength of its components makes it a reliable work tool for professionals or individuals.
Extending the power cord by 700 feet can also resist power fluctuations and cable attenuation; the machine can still work normally. Can cut stainless steel, copper, aluminum alloy, cast iron, aluminum and other conductive metals. You can achieve better results overall with sharper cuts. 80% duty cycle can ensure long-term and efficient cutting. Cut-40 is designed with multiple safety and protection functions, plasma torch gun safety protection, such as automatic compensation for voltage fluctuations, over-heating protection, etc.
AmicoPower #ad - Stainless steel, resulting in straight cuts, angles, alloy steel, circles, aluminum and other conductive metals, v-grooves, cast iron, iron, low-carbon steel, curves, holes, and many others in minutes. It is designed for demanding industrial work and construction and simple tasks around houses.
With less work, so that you can easily use it in of 90V to 300V, you can achieve better results overall with sharper cuts. Apc-70hf is designed with multiple safety and protection functions, such as automatic compensation for voltage fluctuations, over-heating protection, plasma torch gun safety protection, over-loading protection, over-current protection, etc.
The automatic selection function can automatically detect the input voltage, and the machine will automatically adjust it. The fan with automatic temperature control allows the machine to run very quietly. Can cut up to 1. 2 in. Npt 1/4 inch industrial d-type coupler can easily and quickly connect to the air compressor. The lightweight model design makes the machine very convenient to carry anywhere. Apc-70hf is an intelligent power supply system.
1. AmicoPower
#adAmico CUT-50, 50 Amp Plasma Cutter DC Inverter 115/230V Dual Voltage Cutting Machine
#adCuts stainless steel, notches, holes, mild steel, resulting in straight cuts, circles, copper, alloy steel, angles, slots, v-grooves, and other metal materials with ease, curves, aluminum, and many others in minutes.
More information #ad
Can cut up to 3/4 in. Construction, and is designed for both demanding industrial work, including home and hobby use. The torch design provides a sure and comfortable grip made with heat and impact resistant material. It requires less work to produce an overall better result with a cleaner cut. Incorporates advanced igbt inverter technology with an excellent Arc stability. 100~250v wide voltage, 50~60hz, almost all of the voltage and frequency can be used. Quick setup: npt 1/4" industry type d coupler can connect easily with the pre-installed plug on the air compressor.
| Brand | AmicoPower #ad |
| Manufacturer | Amico Electric #ad |
| Height | 13.86 inches |
| Length | 17.91 Inches |
| Weight | 21 Pounds |
| Width | 7.87 Inches |
| Part Number | CUT502019 |
| Model | CUT-50 |
More information #ad
2. AmicoPower
#ad3/5 in. Clean Cut Cutting Machine, Pro. 95~260V Wide Voltage, Amico CUT-50HF 50Amp Non-touch Pilot Arc Plasma Cutter
#adThe cutting effect is very ideal and can finish the work effortlessly and quickly, regardless if the material is very rough, spray painted, rusty, dirty, etc. Stainless steel, aluminum and other conductive metals, v-grooves, and many others in minutes. Npt 1/4 inch industrial d-type coupler can easily and quickly connect to the air compressor.
More information #ad
It is designed for demanding industrial work and construction and simple tasks around houses. With less work, so that you can easily use it in of 90V to 300V, you can achieve better results overall with sharper cuts. It is fully suitable for difficult operations in construction sites, ship docks, agricultural sites, and relatively remote areas. The automatic selection function can automatically detect the input voltage, and the machine will automatically adjust it. Cut-50hf is designed with multiple safety and protection functions, over-current protection, plasma torch gun safety protection, over-heating protection, over-loading protection, such as automatic compensation for voltage fluctuations, etc. The fan with automatic temperature control allows the machine to run very quietly. Can cut up to 4/5 in.
| Brand | AmicoPower #ad |
| Manufacturer | Amico Electric #ad |
| Height | 13.86 Inches |
| Length | 17.91 Inches |
| Weight | 25 Pounds |
| Width | 7.87 Inches |
| Part Number | ACUT50HF2020 |
| Model | CUT-50HF |
More information #ad
3. AmicoPower
#adAmico CUT-60HF, 60 Amp Non-touch Pilot Arc Plasma Cutter, Pro. 95~260V Wide Voltage, 4/5 in. Clean Cut Cutting Machine
#adWith less work, you can achieve better results overall with sharper cuts. Cut-60hf is an intelligent power supply system. It is fully suitable for difficult operations in construction sites, agricultural sites, ship docks, and relatively remote areas.
More information #ad
Cut-60hf incorporates the most advanced igbt inverter technology and non-touch pilot arc cutting processes, spray painted, resulting in excellent arc stability. Npt 1/4 inch industrial d-type coupler can easily and quickly connect to the air compressor. The lightweight model design makes the machine very convenient to carry anywhere. The automatic selection function can automatically detect the input voltage, so that you can easily use it in of 90V to 300V, and the machine will automatically adjust it. Extending the power cord by 700 feet can also resist power fluctuations and cable attenuation; the machine can still work normally. 80% duty cycle can ensure long-term and efficient cutting. The cutting effect is very ideal and can finish the work effortlessly and quickly, regardless if the material is very rough, rusty, greasy, dirty, etc.
| Brand | AmicoPower #ad |
| Manufacturer | Amico Power #ad |
| Height | 12.9 Inches |
| Length | 19 Inches |
| Weight | 25 Pounds |
| Width | 7.6 Inches |
| Part Number | CUT602027 |
| Model | CUT-60HF |
More information #ad
4. AmicoPower
#adAmico CUT-50, 4/5 in. Clean Cut, Professional 50 Amp Plasma Cutter, 110/220V Dual Voltage Cutting Machine
#adMore information #ad
Designed for both demanding industrial and construction work, or home and hobby use. Torch design provides a sure, comfortable grip made from heat and impact resistant material. You can cut stainless steel, mild steel, alloy steel, copper aluminum, and other metal materials.| Brand | AmicoPower #ad |
| Manufacturer | Amico Power #ad |
| Height | 14 Inches |
| Length | 18 Inches |
| Weight | 31 Pounds |
| Width | 8 Inches |
| Part Number | CUT502021 |
| Model | CUT-50 |
More information #ad
5. AmicoPower
#ad70 Amp Non-touch Pilot Arc Air Plasma Cutter, Amico APC-70HF, 80% Duty Cycle., 90~300V Wide Voltage Cutting Machine, 1.2 inch Clean Cut
#adExtending the power cord by 700 feet can also resist power fluctuations and cable attenuation; the machine can still work normally. Apc-70hf can achieve perfect cutting, angles, alloy steel, notches, curves, aluminum alloy, copper, cast iron, slots, iron, and the strength of its components makes it a reliable work tool for professionals or individuals.
More information #ad
The automatic selection function can automatically detect the input voltage, so that you can easily use it in of 90V to 300V, and the machine will automatically adjust it. It is designed for demanding industrial work and construction and simple tasks around houses. Can cut up to 1. 2 in. It is fully suitable for difficult operations in construction sites, agricultural sites, ship docks, and relatively remote areas. The fan with automatic temperature control allows the machine to run very quietly. The lightweight model design makes the machine very convenient to carry anywhere.
| Brand | AmicoPower #ad |
| Manufacturer | Amico Power #ad |
| Height | 15.7 Inches |
| Length | 19.7 Inches |
| Weight | 31 Pounds |
| Width | 8.7 Inches |
| Part Number | APC70HF2020 |
| Model | APC-70HF |
More information #ad
6. AmicoPower
#ad80% Duty Cycle, 80A Non-touch Pilot Arc Air Plasma Cutter, AmicoPower APC-80HF, Grey, 220V/50-60Hz Cutting Machine, Full Size, 1.2 inch Clean Cut
#adCan cut up to 1. 2 in. 80% duty cycle can ensure long-term and efficient cutting. The fan with automatic temperature control allows the machine to run very quietly. Extending the power cord by 700 feet can also resist power fluctuations and cable attenuation; the machine can still work normally.
More information #ad
Apc-80hf incorporates the most advanced igbt inverter technology and non-touch pilot arc cutting processes, greasy, resulting in excellent arc stability. The lightweight model design makes the machine very convenient to carry anywhere. It is fully suitable for difficult operations in construction sites, agricultural sites, ship docks, and relatively remote areas. It is designed for demanding industrial work and construction as well as simple tasks around houses. It can automatically detect the input voltage and automatically compensate the voltage, allowing you to use it easily at 200-250V. Apc-80hf is designed with multiple safety and protection functions, over-current protection, over-loading protection, plasma torch gun safety protection, such as automatic compensation for voltage fluctuations, over-heating protection, etc. Npt 1/4 inch industrial d-type coupler can easily and quickly connect to the air compressor.
| Brand | AmicoPower #ad |
| Manufacturer | Amico Electric Corp #ad |
| Height | 16 Inches |
| Length | 20 Inches |
| Weight | 32 Pounds |
| Width | 9 Inches |
| Part Number | APC802011 |
| Model | ARC-80HF |
More information #ad
7. AmicoPower
#ad200 Amp HF-TIG, 200 Amp Stick Arc DC Inverter Welder, AMICO CTS-200A, 50 Amp Plasma Cutter, 3-in-1 Multifunction Welding Machine
#adIntelligent power supply system, automatic detection of input voltage, automatic switching between 110V and 220V. It can weld 1/2 inch stainless steel, making the welding products extremely clean and perfect. It is the most efficient and multifunctional machine.
More information #ad
The foot pedal function can remotely control and adjust the current, copper perfectly. Extending the power cord by 700 feet can also resist power fluctuations and cable attenuation. 50-amp plasma cutter, curves, etc. 4/5 inches, iron, circles, aluminum alloy, forming straight cuts, aluminum, low carbon steel, copper, alloy steel, pig iron, holes, can cut stainless steel, cast iron, corners, and even V-shaped Groove. The automatic temperature control fan makes the machine run very quietly. The lightweight ergonomic design makes the machine very portable, and dock operations. All accessories and interfaces comply with American standards. With built-in thrust, and current intensity control functions, all tasks can be completed efficiently and easily.
| Brand | AmicoPower #ad |
| Manufacturer | Amico Power #ad |
| Height | 14 Inches |
| Length | 19.5 Inches |
| Weight | 27 Pounds |
| Width | 9 Inches |
| Part Number | CTS-200 |
| Model | CTS-200 |
More information #ad
8. AmicoPower
#ad95~260V Wide Voltage, Amico CUT-55M 55-Amp Air Plasma Cutter, Power Cord Can Extend to 700 Feet
#adIt requires less work to produce an overall better result with a cleaner cut. The torch design provides a sure and comfortable grip made with heat and impact resistant material.
More information #ad
Incorporates advanced igbt inverter technology with an excellent Arc stability. Quick setup: npt 1/4" industry type d coupler can connect easily with the pre-installed plug on the air compressor. Cuts stainless steel, resulting in straight cuts, curves, angles, copper, slots, aluminum, notches, circles, mild steel, alloy steel, and other metal materials with ease, v-grooves, holes, and many others in minutes. Automatic compensation for voltage fluctuation, over-voltage protection, under-voltage protection, over-load protection, automatic temperature control, over-current protection, Power cords extend to 700 feet still can use normally.
| Brand | AmicoPower #ad |
| Manufacturer | Amico Electric #ad |
| Height | 12.9 Inches |
| Length | 19 Inches |
| Weight | 23.6 Pounds |
| Width | 7.6 Inches |
| Part Number | CUT55M2021 |
| Model | CUT-55M |
More information #ad
9. AmicoPower
#adAmico CUT-40, 80% Duty Cycle, Colossal Tech. 1/2 in. Clean Cut. 100-250V, Professional 40 Amp Plasma Cutter
#adThe fan with automatic temperature control allows the machine to run very quietly. Npt 1/4 inch industrial D-type coupler can easily and quickly connect to the air compressor. The lightweight model design makes the machine very convenient to carry anywhere. Cut-40 can achieve perfect cutting, alloy steel, iron, low-carbon steel, pig iron, and the strength of its components makes it a reliable work tool for professionals or individuals.
More information #ad
It is designed for demanding industrial work and construction and simple tasks around houses. Extending the power cord by 700 feet can also resist power fluctuations and cable attenuation; the machine can still work normally. Can cut stainless steel, copper, aluminum alloy, cast iron, aluminum and other conductive metals. You can achieve better results overall with sharper cuts. 80% duty cycle can ensure long-term and efficient cutting. Cut-40 is designed with multiple safety and protection functions, plasma torch gun safety protection, such as automatic compensation for voltage fluctuations, over-heating protection, etc.
| Brand | AmicoPower #ad |
| Manufacturer | Amico Power #ad |
| Height | 14 Inches |
| Length | 18 Inches |
| Weight | 24 Pounds |
| Width | 8 Inches |
| Part Number | CUT402026 |
| Model | CUT-40 |
More information #ad
10. AmicoPower
#adProfessional 70 Amp Non-touch Pilot Arc Plasma Cutter, 1.2 inch Clean Cut, 80% Duty Cycle, APC-70HF, 90V to 300V Wide Voltage Cutting Machine
#adWith less work, so that you can easily use it in of 90V to 300V, you can achieve better results overall with sharper cuts. Apc-70hf is designed with multiple safety and protection functions, such as automatic compensation for voltage fluctuations, over-heating protection, plasma torch gun safety protection, over-loading protection, over-current protection, etc.
More information #ad
Apc-70hf incorporates the most advanced igbt inverter technology and non-touch pilot arc cutting processes, rusty, spray painted, regardless if the material is very rough, greasy, resulting in excellent arc stability. The automatic selection function can automatically detect the input voltage, and the machine will automatically adjust it. The fan with automatic temperature control allows the machine to run very quietly. Can cut up to 1. 2 in. Npt 1/4 inch industrial d-type coupler can easily and quickly connect to the air compressor. The lightweight model design makes the machine very convenient to carry anywhere. Apc-70hf is an intelligent power supply system.
| Brand | AmicoPower #ad |
| Manufacturer | Amico Power #ad |
| Height | 15.7 Inches |
| Length | 19.7 Inches |
| Weight | 31 Pounds |
| Width | 8.7 Inches |
| Part Number | APC70HF2020 |
| Model | APC-70HF |
More information #ad
