RaceFace Chester 31.8 1 inch Riser 740mm Mountain Bicycle Handlebar

#ad
#ad
Race Face #ad - Designed with the perfect width, sweep, and rise to be at home on your DH or hardtail. These bars will last long after your bones, bruises and scrapes heal up and you're ready to tackle that gap jump that has had your number. Shot peened for high impact strength & fatigue resistance. Butted for an optimal strength to weight ratio.

RaceFace Chester 31.8 1 inch Riser 740mm Mountain Bicycle Handlebar #ad - Manufactured from cold drawn, seamless 6061 Alloy. Cold drawn, seamless 6061 aluminum construction. Butted for an optimal strength to weight ratio. 9 degree rearward, 4 degree upward sweep. Shot peened for increased fatigue life. Wider construction & re-designed taper offers more control & increased stiffness. Do you love to ride your mtn bike love boosting big airs, punishing the trails and your gear A rider not worried about having the lightest, most expensive sh*t on the market.

You just want parts that can take a beating and won't let you down The Chester bar is made of tough 6061 alloy with the perfect width, sweep and rise to be at home on both your DH and hardtail rigs.

More information about Race Face #ad

RaceFace Chester Stem

#ad
#ad
SM4080-P #ad - Do you love to ride your mtn bike love boosting big airs, punishing the trails and your gear A rider not worried about having the lightest, big bold graphics, most expensive on the market you just want parts that can take a beating and won't let you down? The Chester Stem is a practical stem with, and that legendary bomb proof Race Face toughness baked right in.

Four bolt bar clamp holds bar securely in position. Faceplate eliminates stress risers which can cause your bar to bend or break. Forged and blasted 2014 alloy for high strength and fatigue resistance at a reasonable weight 31. 8mm clamp, 8-degreex50mm, 1-1/8-Inch. Interlocking u shaped Handlebar Clamp Geometry transferring more load through the stem body and not the bolts.

More information about SM4080-P #ad


Similar products



RaceFace Half Nelson Locking Grips

#ad
#ad
RaceFace GR3103-P #ad - Interlocking u shaped Handlebar Clamp Geometry transferring more load through the stem body and not the bolts. Why is it most grips run best when they are almost worn outHalf Nelsons are designed to give you that super tacky thin feel straight outof the box. Uses race faces soft and durable super tacky VEXY.

. Super slim low profile design lightweight 24g lighter than Race Face Sniper lock on Pair. Faceplate eliminates stress risers which can cause your bar to bend or break. Thin, tacky, light weight everything you want in a grip. Single lock on grip. Raceface mx style half waffle for added grip security compound.

RaceFace Half Nelson Locking Grips #ad - Four bolt bar clamp holds bar securely in position. Topographic moisture channels. Forged and blasted 2014 alloy for high strength and fatigue resistance at a reasonable weight 31. 8mm clamp, 8-degreex50mm, 1-1/8-Inch.

More information about RaceFace GR3103-P #ad


Similar products



RaceFace Respond Mountain Bike Stem

#ad
#ad
Race Face SM40681-p #ad - Forged and blasted 6061 aluminum for high strength and fatigue resistance at a reasonable weight. Raceface mx style half waffle for added grip security compound. The respond stem is engineered to offer an optimal combination of strength, stiffness, and weight at an attractive price point. Faceplate eliminates stress risers which can cause your bar to bend or break.

RaceFace Respond Mountain Bike Stem #ad - Faceplate eliminates 'stress risers' which could cause your bar to bend or break. Designed for riders wanting big hit performance at All Mountain weights. Forged and blasted 2014 alloy for high strength and fatigue resistance at a reasonable weight 31. 8mm clamp, 8-degreex50mm, 1-1/8-Inch. Interlocking u shaped Handlebar Clamp Geometry transferring more load through the stem body and not the bolts.

Single lock on grip. Super slim low profile design lightweight 24g lighter than Race Face Sniper lock on Pair. Topographic moisture channels. Uses race faces soft and durable super tacky VEXY. 195g. Interlocking u-shaped Handlebar Clamp Geometry transferring more load through the stem body and not the bolts.

More information about Race Face SM40681-p #ad


Similar products



RaceFace Ride Mountain Bike Stem

#ad
#ad
RaceFace SM40471-p #ad - Interlocking u shaped Handlebar Clamp Geometry transferring more load through the stem body and not the bolts. Forged and blasted 2014 alloy for high strength and fatigue resistance at a reasonable weight 31. 8mm clamp, 8-degreex50mm, 1-1/8-Inch. Raceface mx style half waffle for added grip security compound.

. Forged and shot peened from 6061 aluminum for high strength and fatigue resistance at a reasonable weight. Four bolt bar clamp holds bar securely in position. Uses race faces soft and durable super tacky VEXY. Single lock on grip. A perfect compliment to your ride bar and seatpost, the Ride stem is designed specifically for riders looking for Race Face engineering and quality at a value price point.

RaceFace Ride Mountain Bike Stem #ad - Interlocking u-shaped Handlebar Clamp Geometry transferring more load through the stem body and not the bolts. Four bolt bar clamp holds bar securely in position. Topographic moisture channels. Forged and blasted 6061 aluminum for high strength and fatigue resistance at a reasonable weight. 195g. Super slim low profile design lightweight 24g lighter than Race Face Sniper lock on Pair.

Faceplate eliminates 'stress risers' which could cause your bar to bend or break.

More information about RaceFace SM40471-p #ad


Similar products



RaceFace Chester Mountain Bike Pedal

#ad
#ad
RaceFace Race Face #ad - Faceplate eliminates 'stress risers' which could cause your bar to bend or break. Interlocking u shaped Handlebar Clamp Geometry transferring more load through the stem body and not the bolts. Four bolt bar clamp holds bar securely in position. Four bolt bar clamp holds bar securely in position. Faceplate eliminates stress risers which can cause your bar to bend or break.

The chester's bearing and bushing system is fully serviceable and the cro-mo axle is fully sealed, for a highly durable and lightweight pedal that offers great performance at an incredible value. Features: fully serviceable bearing & bushing system 8 hex traction pins per side Lightweight nylon composite body Fully sealed cro-mo axle Large platform with same grip as traditional alloy pedals Forged and blasted 2014 alloy for high strength and fatigue resistance at a reasonable weight 31.

RaceFace Chester Mountain Bike Pedal #ad - 8mm clamp, 8-degreex50mm, 1-1/8-Inch. Forged and blasted 6061 aluminum for high strength and fatigue resistance at a reasonable weight. 8 hex traction pins per side. Forged and shot peened from 6061 aluminum for high strength and fatigue resistance at a reasonable weight. Four bolt bar clamp holds bar securely in position.

Lightweight nylon composite body. Super slim low profile design lightweight 24g lighter than Race Face Sniper lock on Pair.

More information about RaceFace Race Face #ad


Similar products



31.8 Stem 45mm Bike Stem Wake Mountain Bike Stem Short Handlebar Stem for Most Bicycle, Road Bike, MTB, BMX, Fixie Gear, Cycling Aluminum Alloy, Black Blue Gold Red

#ad
#ad
Wake #ad - Large platform with same grip as traditional alloy pedals. Faceplate eliminates 'stress risers' which could cause your bar to bend or break. Super slim low profile design lightweight 24g lighter than Race Face Sniper lock on Pair. Single lock on grip. Interlocking u-shaped Handlebar Clamp Geometry transferring more load through the stem body and not the bolts.

8 hex traction pins per side. Forged and shot peened from 6061 aluminum for high strength and fatigue resistance at a reasonable weight. Four bolt bar clamp holds bar securely in position. Interlocking u shaped Handlebar Clamp Geometry transferring more load through the stem body and not the bolts. Topographic moisture channels.

31.8 Stem 45mm Bike Stem Wake Mountain Bike Stem Short Handlebar Stem for Most Bicycle, Road Bike, MTB, BMX, Fixie Gear, Cycling Aluminum Alloy, Black Blue Gold Red #ad - Uses race faces soft and durable super tacky VEXY. Four bolt bar clamp holds bar securely in position. Faceplate eliminates stress risers which can cause your bar to bend or break. Lightweight nylon composite body. Forged and blasted 6061 aluminum for high strength and fatigue resistance at a reasonable weight.

Fully serviceable bearing & bushing system. Fully sealed cro-mo axle.

More information about Wake #ad


Similar products



Race Face Headset Spacer Kit with Top Cap Black

#ad
#ad
Race Face #ad - Choose aluminum or ultralight carbon. 8 hex traction pins per side. 195g. Raceface mx style half waffle for added grip security compound. Forged and shot peened from 6061 aluminum for high strength and fatigue resistance at a reasonable weight. Four bolt bar clamp holds bar securely in position. Interlocking u shaped Handlebar Clamp Geometry transferring more load through the stem body and not the bolts.

Fully sealed cro-mo axle. Single lock on grip. Topographic moisture channels. Fully serviceable bearing & bushing system. Four bolt bar clamp holds bar securely in position. Easy installation, just connect up the original front fork stem. Universal short handle bar stem suitable for most road bike, fixed gear bicycle, mountain bikes, etc.

Race Face Headset Spacer Kit with Top Cap Black #ad - 4 different height 1-1/8" spacers and a top cap, all with Race Face logos. Large platform with same grip as traditional alloy pedals. Uses race faces soft and durable super tacky VEXY. Item description4 different height alloy spacers and a top cap, all with race Face logosItem Specificationssize: 1-1/8"stack: 2, 10, 5, 15mmcolor: blackweight: -: Forged and blasted 2014 alloy for high strength and fatigue resistance at a reasonable weight 31.

8mm clamp, 8-degreex50mm, 1-1/8-Inch.

More information about Race Face #ad


Similar products



Truvativ 40 0-Degree 42 Height 31.8 1-1/8 Hussefelt Stem

#ad
#ad
Truvativ 40 0-Degree-Col #ad - Raceface mx style half waffle for added grip security compound. Interlocking u shaped Handlebar Clamp Geometry transferring more load through the stem body and not the bolts. Stereer tube diameter: 28. 6mm 1-1/8", length: 45mm, Handlebar diameter: 31. 8mm 1-1/4", weight: 130g. Hollow design, Light weight. Faceplate eliminates stress risers which can cause your bar to bend or break.

Interlocking u-shaped Handlebar Clamp Geometry transferring more load through the stem body and not the bolts. Fully serviceable bearing & bushing system. Weight: 203g 40mm. Recommended Group: Downhill, Freeride. Four bolt bar clamp holds bar securely in position. Faceplate eliminates 'stress risers' which could cause your bar to bend or break.

Truvativ 40 0-Degree 42 Height 31.8 1-1/8 Hussefelt Stem #ad - Single lock on grip. Bolts: CrMo. Forged and blasted 6061 aluminum for high strength and fatigue resistance at a reasonable weight. 42mm steerer clamp stack height. Forged and blasted 2014 alloy for high strength and fatigue resistance at a reasonable weight 31. 8mm clamp, 8-degreex50mm, 1-1/8-Inch.

More information about Truvativ 40 0-Degree-Col #ad


Similar products



RaceFace Crank Boot Protectors

#ad
#ad
Race Face CR2074-P #ad - Interlocking u-shaped Handlebar Clamp Geometry transferring more load through the stem body and not the bolts. Fully sealed cro-mo axle. Faceplate eliminates 'stress risers' which could cause your bar to bend or break. Interlocking u shaped Handlebar Clamp Geometry transferring more load through the stem body and not the bolts.

Faceplate eliminates stress risers which can cause your bar to bend or break. Raceface mx style half waffle for added grip security compound. Trail riding can be tough on your gear. Bolts: CrMo. Four bolt bar clamp holds bar securely in position. Super slim low profile design lightweight 24g lighter than Race Face Sniper lock on Pair.

RaceFace Crank Boot Protectors #ad - Large platform with same grip as traditional alloy pedals. Recommended Group: Downhill, Freeride. Four bolt bar clamp holds bar securely in position. Easy installation, just connect up the original front fork stem. Universal short handle bar stem suitable for most road bike, mountain bikes, fixed gear bicycle, etc.

4 different height 1-1/8" spacers and a top cap, all with Race Face logos. Material: forged AL-6061-T6.

More information about Race Face CR2074-P #ad


Similar products



RaceFace 104mm Single Chain Ring

#ad
#ad
Cyclone Bicycle RRSNNW104X30BLK-P #ad - Fits next sl g3 cranks, Six C cranks. 7075-t6 aluminum, aerospace grade strength. Tested in some of the most punishing riding terrain are built to last. 195g. Narrow wide tooth profiling ensures ultimate chain retention. Compatible for 9, 10 and 11 speed. Forged and blasted 2014 alloy for high strength and fatigue resistance at a reasonable weight 31.

8mm clamp, 8-degreex50mm, 1-1/8-Inch. Faceplate eliminates stress risers which can cause your bar to bend or break. Single lock on grip. Uses race faces soft and durable super tacky VEXY. Material: forged AL-6061-T6. 8 hex traction pins per side. Lightweight nylon composite body. Reversible laser etched graphics. Recommended Group: Downhill, Freeride.

RaceFace 104mm Single Chain Ring #ad - Stiff 4mm plate thickness and I-beam construction transfer loads without flexing. Large platform with same grip as traditional alloy pedals. Super slim low profile design lightweight 24g lighter than Race Face Sniper lock on Pair. Fully sealed cro-mo axle.

More information about Cyclone Bicycle RRSNNW104X30BLK-P #ad


Similar products