Lot of 10 Service/Access Valve + Core & Cap/Core Remover 1/4″ SAE x 1/4″ OD x 2″ stem

#ad
#ad
Articco AV-14B #ad - X 2" stem. Usual installation Instructions *- Remove cap and core. Uses of access valves - on many refrigeration and air conditioning systems to allow servicing, including recharging with refrigerant; - By plumbers conducting leak-down pressure tests on pipe installations; - As a bleeding and test port on the fuel rail of some fuel injected engines; - And in the buoyancy compensator inflators of SCUBA systems.

A valve cap is important on a Schrader valve to avoid entering dirt and jamming it or contaminating the sealing surfaces and causing a leak. Insert tubing or body into the corresponding size line or hole and braze into place. These valves are generally used to have an easy access to the systems for vacuum, charging, pressure check up and other applications.

Lot of 10 Service/Access Valve + Core & Cap/Core Remover 1/4" SAE x 1/4" OD x 2" stem #ad - The stem is a self-contained valve which opens to admit gas to a chamber. Each valve has a core and a cap with valve core remover. The caps are made of metal, they are provided with core remover and have an inside rubber o-ring. Also the valve cap is provided with a core remover making it very useful in installation or repair works.

Replace core, tighten, evacuate and charge the system. A valve stem is a self-contained valve which opens to admit gas to a chamber such as air to inflate a tire, or both, or a spring, and is then automatically closed and kept sealed by the pressure in the chamber, to prevent the gas from escaping. This valves are also widely used in high-pressure hydraulic systems on aircraft - Many domestic fire extinguishers use an internal access valve, but with a lever on top to enable quick release of the pressurized content 10 new service/ access valves 1/4 sae x 1/4 O.

More information about Articco AV-14B #ad

LUCAS MILHAUPT SIL-FOS 15% Part #95177 Silver Solder 7 Sticks

#ad
#ad
LUCAS MILHAUPT #ad - Pkgs silver 15% silver/copper/phosphorus brazing alloy 1190-1480 Deg F Melt Range, 1/16" Dia X 16" Length, 7 pcs per pkg 21. 2 x 4. 3 x 4. 3 inches. 7 sticks.

More information about LUCAS MILHAUPT #ad


Similar products



SUPCO BPV31 OR TJ90BPV31 GENUINE FACTORY OEM ORIGINAL BULLET PIERCING VALVE FOR 1/4”, 5/16” AND 3/8” TUBING

#ad
#ad
Supco TJ90BPV31 #ad - 7 sticks. Part number tj90bpv31 ap4502525 replaces bpv31, gpv38, gpv14, gpv56, bpv31, gpv31, bpv31d, MPV31, BPV31 21.2 x 4. 3 x 4. 3 inches. Fits 3 sizes of tubing 1/4", 5/16" and 3/8". Includes instructions. Genuine factory oem original for proper fit, easy installation and reliability.

More information about Supco TJ90BPV31 #ad


Similar products



Copper Pipe Tube Expander Hand Expanding Tool Universal Hand Refrigeration Tools Copper Pipe Swaging Tool Tube Expander 1/4-inch 5/16-inch 3/8-inch 1/2-inch 5/8-inch 3/4-inch 7/8-inch

#ad
#ad
FOLAI #ad - Internal start expanded tube on Copper Tube2. Genuine factory oem original for proper fit, easy installation and reliability. Scope: commercial, air conditioning maintenance. Includes instructions. Expanded tube completed copper tube docking could be welded 21. 2 x 4. 3 x 4. 3 inches. Material: Aluminium Alloy. Expanded tube use a circular motion when the effect more round3.

7 sticks. Fits 3 sizes of tubing 1/4", 5/16" and 3/8". Product Description:1. Universal manual expander designed for inch tube: 1/4-inch 5/16-inch 3/8-inch 1/2-inch 5/8-inch 3/4-inch 7/8-inch. 2. Universal manual expander designed for metric tube:6mm, 10mm, 12mm, 8mm, 19mm,  16mm, 22mm.3. Seven in one expansion tube lightweight, convenient.

Copper Pipe Tube Expander Hand Expanding Tool Universal Hand Refrigeration Tools Copper Pipe Swaging Tool Tube Expander 1/4-inch 5/16-inch 3/8-inch 1/2-inch 5/8-inch 3/4-inch 7/8-inch #ad - 4. With the human body engineering mechanics handle, grip comfortable. 5. Spring design, make it work more effort.

More information about FOLAI #ad


Similar products



Supco BPV31 Bullet Piercing Valve

#ad
#ad
Supco BPV31 #ad - Material: Aluminium Alloy. 7 sticks. This tool can be use to expand copper pipe with diameter: 6/8/10/12/16/19/22mm1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 7/8". Includes instructions. Genuine factory oem original for proper fit, easy installation and reliability. Manufacturer model # BPV31. Whirlpool item. Supco Item. The only valve with a permanent type, patented gasket application Creates a permanent, leak-proof seal that will withstand any pressure and temperature for the life of the unit Furnished with adapter sleeves for multiple use application Hex key included No tools required 1/4" male flare outlet.

Hinge design, to avoid the handle swing. Scope: commercial, air conditioning maintenance. Genuine Replacement Part. Fits 3 sizes of tubing 1/4", 5/16" and 3/8". 21. 2 x 4. 3 x 4. 3 inches.

More information about Supco BPV31 #ad


Similar products



Superior Tool 17660 6-In-1 Swaging Tool

#ad
#ad
Superior Tool 17660 #ad - Join similar size copper tubing without couplings. Manufacturer model # BPV31. Only one solder joint required. Swaging tool. Genuine Replacement Part. This tool can be use to expand copper pipe with diameter: 6/8/10/12/16/19/22mm1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 7/8". 21. 2 x 4. 3 x 4. 3 inches. Material: Aluminium Alloy. Supco Item.

Fits 3 sizes of tubing 1/4", 5/16" and 3/8". Whirlpool item. Hinge design, to avoid the handle swing. Genuine factory oem original for proper fit, easy installation and reliability. For over 60 years, we've been offering customers worldwide the absolute best value in professional quality and innovative products.

Superior Tool 17660 6-In-1 Swaging Tool #ad - 7 sticks. Scope: commercial, air conditioning maintenance. Includes instructions. Insert tool into copper, brass or aluminum tubing and strike with hammer.

More information about Superior Tool 17660 #ad


Similar products



Lot of 10 Service/Access Valve + Core & Cap/Core Remover 1/8" SAE x 1/4" OD x 2" stem

#ad
#ad
Articco AV-18B #ad - Also the valve cap is provided with a core remover making it very useful in installation or repair works. Each valve has a core and a cap with valve core remover. The caps are made of metal, they are provided with core remover and have an inside rubber o-ring. Replace core, tighten, evacuate and charge the system.

Fits 3 sizes of tubing 1/4", 5/16" and 3/8". They are most commonly used on automobile and bicycle wheels, but also for many other applications. Genuine Replacement Part. 7 sticks. Insert tubing or body into the corresponding size line or hole and braze into place. Hinge design, to avoid the handle swing. Only one solder joint required.

Lot of 10 Service/Access Valve + Core & Cap/Core Remover 1/8" SAE x 1/4" OD x 2" stem #ad - Manufacturer model # BPV31. Insert tool into copper, brass or aluminum tubing and strike with hammer. These service/access valves are also known as Schrader valve, or American Valve, and they consist of a valve stem into which a valve core is threaded. These valves are generally used to have an easy access to the systems for vacuum, charging, pressure check up and other applications.

X 2" stem. The core is a poppet valve assisted by a spring that is threaded into the steam.

More information about Articco AV-18B #ad


Similar products



Pack of 25 CD4460 Schrader Valve Cores with Teflon Seal blue

#ad
#ad
C&D Valve CD4460/25 #ad - Supco Item. Manufacturer model # BPV31. 10 new service/ access valves 1/4 sAE x 1/8 O. D. Join similar size copper tubing without couplings. Made in USA. The stem is a self-contained valve which opens to admit gas to a chamber. Scope: commercial, air conditioning maintenance. Genuine factory oem original for proper fit, easy installation and reliability.

Hinge design, to avoid the handle swing. Includes instructions. Insert tool into copper, brass or aluminum tubing and strike with hammer. Material: Aluminium Alloy. Whirlpool item. Genuine Replacement Part. This tool can be use to expand copper pipe with diameter: 6/8/10/12/16/19/22mm1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 7/8".

Pack of 25 CD4460 Schrader Valve Cores with Teflon Seal blue #ad - X 2" stem. The core is a poppet valve assisted by a spring that is threaded into the steam. Fits 3 sizes of tubing 1/4", 5/16" and 3/8". Each valve has a core and a cap with valve core remover. The caps are made of metal, they are provided with core remover and have an inside rubber o-ring. C&d valve cd4460 valve core with teflon seal blue, tapered barrel pack of 25 cores 21.

More information about C&D Valve CD4460/25 #ad


Similar products



SUPCO BPV-31 Bullet 3-in-1 Line Tap Piercing Valve, 500 psi Pressure, 1/4", 5/16", and 3/8" OD Size Pack of 12

#ad
#ad
Sealed Unit Parts Co., Inc BPV-31 #ad - Manufactured by sealed unit parts Co. Inc. Insert tool into copper, brass or aluminum tubing and strike with hammer. Corrosion resistant. Fits 3 sizes of tubing 1/4", 5/16" and 3/8". Non-positional mounting, no adapter Valve required, a sealing force of over 180 inch lbs. Torque tested with 450 lbs. Unit is a pack of 25.

SUPCO BPV-31 Bullet 3-in-1 Line Tap Piercing Valve, 500 psi Pressure, 1/4", 5/16", and 3/8" OD Size Pack of 12 #ad - 500 psi maximum pressure. Hinge design, to avoid the handle swing. Each valve has a core and a cap with valve core remover. The caps are made of metal, they are provided with core remover and have an inside rubber o-ring. Includes instructions. A sealing force of over 180 inch lbs. Torque tested With 450 Lbs. The stem is a self-contained valve which opens to admit gas to a chamber.

Patented valve gasket provides 50 times more sealing area than competitive 'o' ring types. Non-positional mounting, not adapter valve required. Swaging tool. X 2" stem. The core is a poppet valve assisted by a spring that is threaded into the steam.

More information about Sealed Unit Parts Co., Inc BPV-31 #ad


Similar products



Uniweld 70006 Multi Swage 6-in-1 Punch for 3/16-Inch, 1/4-Inch, 5/16-Inch, 3/8-Inch, 1/2-Inch and 5/8-Inch OD Tubing

#ad
#ad
Uniweld 70006 #ad - This tool can be use to expand copper pipe with diameter: 6/8/10/12/16/19/22mm1/4" 5/16" 3/8" 1/2" 5/8" 3/4" 7/8". Fits 3 sizes of tubing 1/4", 5/16" and 3/8". 500 psi maximum pressure. Swaging tool. Swaging method means one solder joint, not two, so it will take half the soldering or brazing time that fittings require.

A sealing force of over 180 inch lbs. Torque tested With 450 Lbs. Pressure tested At 250°F. The stem is a self-contained valve which opens to admit gas to a chamber. 6-in-1 swage punch for 3/16in, 5/16in, 3/8in, 1/4in, 1/2in and 5/8in O. D. Designed to enlarge one end of copper tubing to make a connection without a fitting.

Uniweld 70006 Multi Swage 6-in-1 Punch for 3/16-Inch, 1/4-Inch, 5/16-Inch, 3/8-Inch, 1/2-Inch and 5/8-Inch OD Tubing #ad - X 2" stem. The core is a poppet valve assisted by a spring that is threaded into the steam. 10 new service/ access valves 1/4 sAE x 1/8 O. D. Supco Item. Unwieldy 70006 multi swage punch is a 6-in-1 punch for 3/16", 1/4", 5/16", 3/8", 1/2" and 5/8" O. D tubing.

More information about Uniweld 70006 #ad


Similar products



TOOGOOR 5 Pcs Air Conditioner Spare Part 6mm Copper Tube OD Filling Access Valve

#ad
#ad
TOOGOO(R) CECOMINOD028176 #ad - Color : gold tone, copper Tone;Net Weight : 88g. Hinge design, to avoid the handle swing. Swaging method means one solder joint, not two, so it will take half the soldering or brazing time that fittings require. Fits 3 sizes of tubing 1/4", 5/16" and 3/8". Toogoor 5 pcs air conditioner spare Part 6mm Copper Tube OD Filling Access Valve.

TOOGOOR 5 Pcs Air Conditioner Spare Part 6mm Copper Tube OD Filling Access Valve #ad - Widely used in the refrigerant system, it used to charge the refrigerant like R22, R410a or R134a pipe line to ensure the smooth operation of air-conditioner system with enough refrigerant in the copper line and indoor & outdoor units in VRV/VRF syste 21. 2 x 4. 3 x 4. 3 inches. X 2" stem. The core is a poppet valve assisted by a spring that is threaded into the steam.

10 new service/ access valves 1/4 sAE x 1/8 O. D. Unit is a pack of 25. Insert tool into copper, brass or aluminum tubing and strike with hammer. Material: Aluminium Alloy. Genuine Replacement Part.

More information about TOOGOO(R) CECOMINOD028176 #ad


Similar products