Fuelworks 15111200A 1″ Mechanical Fuel Meter, Black

Operating pressure: 50Psi/3. 5mbar. Reliable, easy to install, and simple to calibrate in the field. Aluminum metering chamber with polybutylene Notating disk. Readout: 4-digit subtatals, 8-digital totals. Max. Bursting pressure:400Psi/28Bar. Mechanical fuel meter.

---

Fill-Rite FRH07520 3/4" x 20' Fuel Transfer Hose

We use only the most durable materials to insure long life and dependability. Fill-rite and sotera branded products deliver superior performance time and time again, regardless of the application or installation. Built into every fuel transfer pump, chemical transfer pump and meter is over 50 years of experience—and the pride and workmanship associated with the moniker “Made in USA”.

Product is highly durable and very easy to use. This product is manufactured in USA. This product adds a great value.


Similar products

---

GOLDENROD 491 Fuel Tank Filter Wrench

Goldenrod fuel tank filter wrench. This product is manufactured in USA. This product adds a great value. Features hole for hanging on storage tank. Eliminates problem of cracking bowls during element change process. Product is highly durable and very easy to use. Designed specifically for easy removal of GOLDENROD See-Through bowl fuel tank filters.

Weather-resistant plastic. Made in the U. S. A.


Similar products

---

12 Volt, 15 GPM - Fill-Rite FR1210G Fuel Transfer Pump, Telescoping Suction Pipe, 12' Delivery Hose, Manual Release Nozzle

This product is manufactured in USA. Cast iron housing with buna-n mechanical seal and O-ring for durability. Cast bronze rotor with bronze rotary vanes. The fr1210g is ideal for pumping gas, diesel fuel and kerosene. The fr1210g comes complete with 12 foot static wire hose and manual nozzle. 15 gpm flow capacity at 2, 600 rpm with 37' maximum lift.

Suitable for transfer of gasoline, E-15, kerosene, B20, diesel, and mineral spirits. Ul and cUL listed. Features hole for hanging on storage tank. The fr1210g comes complete with 12 foot static wire hose and manual nozzle. It features a 12 volt dc pump with manual nozzle and an amp draw that's easy on your DC power source.

Heavy duty cast iron construction and two threaded base for tank mounting. Built in strainer. Made in the U. S. A. 1/4 hp, 12vdc, 20 amp DC motor. Designed specifically for easy removal of GOLDENROD See-Through bowl fuel tank filters. Diesel/gasoline/kerosene/E15/BD up to B20


Similar products

---

GOLDENROD 496-3/4 WATER-BLOCK FILTER 56591 Bowl Fuel Tank Filter with 3/4" NPT Top Cap

Features hole for hanging on storage tank. Designed specifically for easy removal of GOLDENROD See-Through bowl fuel tank filters. See-thru bowl allows for visual monitoring of fuel flow. Also compatible with biodiesel blends up to 20%. See-through bowl allows for visual monitoring of fuel flow. Cast bronze rotor with bronze rotary vanes.

Eliminates problem of cracking bowls during element change process. Water-absorbing polymers trap water, restricting fuel flow when it is time to replace the element. May be used by itself or in combination with a #495 fuel filter for added protection against microscopic particle contamination. 15 gpm flow capacity at 2, 600 rpm with 37' maximum lift.

Also removes microscopic particles 17 microns of rust, sand, dirt, scale and lint. Heavy duty cast iron construction and two threaded base for tank mounting. Made in the U. S. A. 1/4 hp, 12vdc, 20 amp DC motor. Built in strainer. Cast iron housing with buna-n mechanical seal and O-ring for durability.


Similar products

---

Apache 99000234 1" Fuel Swivel

Product is highly durable and very easy to use. Diesel/gasoline/kerosene/E15/BD up to B20 This product adds a great value. Restricting fuel flow when it is time to replace the element,. Features hole for hanging on storage tank. See-through bowl allows for visual monitoring of fuel flow. Water absorbing polymers trap water.

Cast iron housing with buna-n mechanical seal and O-ring for durability. Suitable for transfer of gasoline, diesel, B20, E-15, kerosene, and mineral spirits. Ul and cUL listed. Built in strainer. May be used by itself or in combination with a #495 fuel filter for added protection against microscopic particle contamination.

1-inches pipe thread. 1-inches pipe thread. It allows for freer movement and ease while using a fuel nozzle-hose assembly by preventing twisting, binding, and kinking of fuel hoses. Made in the U. S. A. 1/4 hp, 12vdc, 20 amp DC motor. Heavy duty cast iron construction and two threaded base for tank mounting.


Similar products

---

Apache 99000247 1" Green Auto Shut-Off Diesel Nozzle

Suitable for transfer of gasoline, B20, diesel, kerosene, E-15, and mineral spirits. Ul and cUL listed. Maximum recommended flow rate of 25 GPM; working pressure up to 150 psi. Designed for pump driven fuel systems with a minimum of 15 PSI and a maximum of 43 PSI. See-through bowl allows for visual monitoring of fuel flow.

Designed specifically for easy removal of GOLDENROD See-Through bowl fuel tank filters. 1" female pipe thread connection with 1-3/16" Spout, auto shut-off diesel nozzle. Water absorbing polymers trap water. It allows for freer movement and ease while using a fuel nozzle-hose assembly by preventing twisting, binding, and kinking of fuel hoses.

1-inches pipe thread. The green, vinyl covered handle improves operator comfort and product identification while protecting the vehicle from scratches and nicks, and insulating the hand when in use. Do not use on gravity flow systems. Cast bronze rotor with bronze rotary vanes. Built in strainer. Water-block filter removes water from gasoline and diesel fuel; Water-absorbing polymers trap water, restricting fuel flow when it is time to replace the element.

Features hole for hanging on storage tank.


Similar products

---

Apache 99000233 3/4" Fuel Swivel

Built in strainer. Removes water from gasoline & diesel fuel,. Cast bronze rotor with bronze rotary vanes. Explosion-proof ul/CUL listed 1/4 HP motor. Cast iron housing with buna-n mechanical seal and O-ring for durability. Do not use on a gravity pump flow systems. Fuel transfer hose swivel. 3/4-inches pipe thread.

1" female pipe thread connection with 1-3/16" Spout, auto shut-off diesel nozzle. Water absorbing polymers trap water. Maximum recommended flow rate of 25 GPM; working pressure up to 150 psi. For use with gasoline, methanol and gasoline blends, 15 percent ethanol, and diesel fuel. Hold-open handle clip for fast, effortless filling.

15 gpm flow capacity at 2, 600 rpm with 37' maximum lift. Made in the U. S. A. 1/4 hp, 12vdc, 20 amp DC motor. Fuel transfer hose swivel. Water-block filter removes water from gasoline and diesel fuel; Water-absorbing polymers trap water, restricting fuel flow when it is time to replace the element.


Similar products

---

Fill-Rite 1200KTF7018 18 GPM Particulate Kit

Keep your engines running their best by using Pump Filters from Fill-Rite. 1-inches pipe thread. 17 micron filtration,. Product is highly durable and very easy to use. Fuel transfer hose swivel. Features hole for hanging on storage tank. Made in the U. S. A. 1/4 hp, 12vdc, 20 amp DC motor. Cast bronze rotor with bronze rotary vanes.

It allows for freer movement and ease while using a fuel nozzle-hose assembly by preventing twisting, binding, and kinking of fuel hoses. It allows for freer movement and ease while using a fuel nozzle-hose assembly by preventing twisting, binding, and kinking of fuel hoses. 3/4-inches pipe thread. Removes water from gasoline & diesel fuel,.

Designed specifically for easy removal of GOLDENROD See-Through bowl fuel tank filters. May be used by itself or in combination with a #495 fuel filter for added protection against microscopic particle contamination. Particulate filters are suited to handle contamination problems caused by dirt, silt and corrosion.

Heavy duty cast iron construction and two threaded base for tank mounting. Weather-resistant plastic. Helps your engines operate more efficiently.


Similar products

---

Fill-Rite N075DAU10 3/4" Automatic Fuel Nozzle

3/4-inches pipe thread. Removes water from gasoline & diesel fuel,. 1-inches pipe thread. Designed specifically for easy removal of GOLDENROD See-Through bowl fuel tank filters. Maximum recommended flow rate of 25 GPM; working pressure up to 150 psi. Cast bronze rotor with bronze rotary vanes. Suitable for transfer of gasoline, B20, kerosene, E-15, diesel, and mineral spirits.

Ul and cUL listed. Restricting fuel flow when it is time to replace the element,. 1" female pipe thread connection with 1-3/16" Spout, auto shut-off diesel nozzle. 3/4" diameter nozzle and a 3/4" NPT inlet for attaching to a fuel line. It allows for freer movement and ease while using a fuel nozzle-hose assembly by preventing twisting, binding, and kinking of fuel hoses.

Features hole for hanging on storage tank. Weather-resistant plastic. Removes microscopic particles 17 microns of rust, sand, dirt, scale, and lint. Zinc die-cast top cap with 3/4" NPT pipe fittings. Heavy duty cast iron construction and two threaded base for tank mounting. Water absorbing polymers trap water.

Diesel/gasoline/kerosene/E15/BD up to B20


Similar products

---

GOLDENROD 496-5 Fuel Tank Filter Replacement Water-Block Element

For use with gasoline, methanol and gasoline blends, 15 percent ethanol, and diesel fuel. Hold-open handle clip for fast, effortless filling. Pre-filtering keeps your fuel cleaner. Water-absorbing polymers trap water, restricting fuel flow when it is time to replace the element. 17 micron filtration,. Water absorbing 17 micron.

Features hole for hanging on storage tank. Small, trim, and a full hand insulator that protects the vehicle from scratches and nicks, and lightweight with a low profile aluminum body, and insulates hand when in use. Designed for pump driven fuel systems with a minimum of 15 PSI and a maximum of 43 PSI. Green body cover indicates gasoline, diesel, Kerosene compatibility and automatic shut-off for safety.

Working pressure of 50 psi and Minimum temperature rating of -20 degrees F. Cast bronze rotor with bronze rotary vanes. 1" female pipe thread connection with 1-3/16" Spout, auto shut-off diesel nozzle. For goldenrod see-through bowl fuel tank filter Water-Block models 496 and 496-3/4 only. 3/4" diameter nozzle and a 3/4" NPT inlet for attaching to a fuel line.

3/4 inch NPT. Helps your engines operate more efficiently.


Similar products