Antminer Power Supply APW3++ for S9 or L3+ or D3 w/ 10 Connectors

#ad
#ad
BITMAIN APW3++ #ad - Fan will turn on and off as needed by the unit; this is normal. Designed for the antMiner L3+/S9/T9/D3. Includes ten 6-pin PCIe connectors. Maximum output: 1200w @ 110v-120v, 1600W @ 220v-240v. Power cord not included, requires standard PC power cable C13.

More information about BITMAIN APW3++ #ad

Tripp Lite Heavy Duty Computer Power Cord, 15A, 14AWG NEMA 5-15P to IEC-320-C13, 6-ft. P007-006

#ad
#ad
TRIPP LITE P007-006 #ad - Also, manufactured in compliance with strict RoHS specifications. This allows you to extend the length of a PC or peripheral power cord by 6 feet and convert a C14 device into a standard 5-15P. This power cord is the ideal solution for powering a PC or peripheral device in applications that require higher-rated, heavier-gauge cabling.

Reliable design: rohs compliant and is UL listed. 6-ft. C13 to 5-15p connectors, 3 x 14 awg conductors, 15A / 125V rating. Power cable: features a c13 receptacle on one end and a standard 5-15P connector on the other end. Lifetime warranty: Desktop PC power cable is backed by a lifetime limited warranty. Use tripp lite's p007-006 in server applications that require a higher rated, heavier gauge cable.

Tripp Lite Heavy Duty Computer Power Cord, 15A, 14AWG NEMA 5-15P to IEC-320-C13, 6-ft. P007-006 #ad - High-quality connectors: c13 to 5-15p connectors, 3 x 14 AWG conductors, 15A / 125V rating. Heavy duty - 14awg: plug computers and peripherals into a standard outlet.

More information about TRIPP LITE P007-006 #ad


Similar products



Bitmain Antminer S9 Bitcoin Miner, 0.098 J/GH Power Efficiency, 13.5TH/s

#ad
#ad
Bitmain Antminer S9 #ad - Built-in web management portal - No separate host computer or software required. Power Efficiency: 0098 w/gh ±7% 4. Lifetime warranty: Desktop PC power cable is backed by a lifetime limited warranty. Also, manufactured in compliance with strict RoHS specifications. Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter.

6. This does not mean there are loose parts and does not mean the item is defective. Heavy duty - 14awg: plug computers and peripherals into a standard outlet. 4. The warranty will be voided by overclocking. Power consumption: 1323W ±10% Power supply not included. Hash rate: 13. 5 th/s ±5% 2. The restocking fees are typically waived in the event that there is a provable failure that prevents the AntMiner from being within 5% of advertised speeds within the first 30 days.

Bitmain Antminer S9 Bitcoin Miner, 0.098 J/GH Power Efficiency, 13.5TH/s #ad - Bitmain recommends the APW3++ for those with 220v power. All ten 6-pin pci-e power connectors are required. Very loud! sounds like a whiny vacuum.

More information about Bitmain Antminer S9 #ad


Similar products



AntMiner V9~4TH/s @ 0.253W/GH Bitcoin/Bitcoin Cash ASIC Miner V9

#ad
#ad
Bitmain V9 #ad - This power cord is the ideal solution for powering a PC or peripheral device in applications that require higher-rated, heavier-gauge cabling. Power supply is not included* bitmain recommends using the APW3++ or APW7 power supply. Power consumption: 1027w ±10% at the wall, 93% efficiency, with Bitmain PSU, 25C ambient temp3.

Power cable: features a c13 receptacle on one end and a standard 5-15P connector on the other end. Power consumption: 1323W ±10% Power supply not included. Most power efficient bitcoin Miner: 0098 j/gh ±7%. Network connection: Ethernet network cable not includedPlease note the following: 1. Extremely reliable - Designed for 24/7 Constant Use.

AntMiner V9~4TH/s @ 0.253W/GH Bitcoin/Bitcoin Cash ASIC Miner V9 #ad - Power consumption: 1027W ±10% power supply is not included. All ten 6-pin pci-e power connectors are required. Heavy duty - 14awg: plug computers and peripherals into a standard outlet. 4. The restocking fees are typically waived in the event that there is a provable failure within the first 30 days and the warranty has not been voided by overclocking.

Dimensions: 301mml*123mmW*155mmH7. Cooling: 2x 12038 fans8.

More information about Bitmain V9 #ad


Similar products



Antminer D3 19.3 GH/s X11 ASIC Dash Miner

#ad
#ad
Bitmain Antminer D3 #ad - 6-ft. C dimensions of the miner: 12. 6 x5. 12 x 7. 5" d hashing algorithm: x11 - compatible coins: dash, mue, lkc, grn, treau, kurt, arc, smc, adz, hpc, mmm, vltc, mnd, atx, gill, bsc, hcc, cnt, crm, sev, j-x11, tor, ozc, uis-x11, sand, pxi, bops, onx, infx, start, boli, fal, lgbtq, mar, coxst, ent, marx, cann, kash, ery, ogn, creva, DP, XCXT, PIZZA, CNO, XVP 2.

. One apw3++ psu can not power more than one Antminer D3. Extremely reliable - Designed for 24/7 Constant Use. Power consumption: 1027W ±10% power supply is not included. Lifetime warranty: Desktop PC power cable is backed by a lifetime limited warranty. Do not connect more than one PSU to the same hashing board! 5.

Antminer D3 19.3 GH/s X11 ASIC Dash Miner #ad - Hash rate: 19. 3 gh/s variation of ±5% is expected. Heavy duty - 14awg: plug computers and peripherals into a standard outlet. Reliable design: rohs compliant and is UL listed. Separate power supply to control board: there is one additional 6pin PCIe connector on the IO board which must be connected to the PSU to get power.

Do not connect more than one psu to the same hashing board! Separate power supply to control board: there is one additional 6pin PCIe connector on the IO board which must be connected to the PSU to get power. This power cord is the ideal solution for powering a PC or peripheral device in applications that require higher-rated, heavier-gauge cabling.

More information about Bitmain Antminer D3 #ad


Similar products



AntMiner T9+ 10.5TH/s @ 0.136W/GH 16nm ASIC Bitcoin & Bitcoin Cash Miner

#ad
#ad
Bitmain T9+_10.5T #ad - The sound is from the hashing boards moving back and forth against the metal frame. Power consumption: 1200w at the wall, with Bitmain's APW3 PSU, 93% efficiency, 25°C ambient temp. Hashing algorithm: X11 Dash and many others. Due to the nature of these products, there are higher than normal restocking fees typically 40%.

Lifetime warranty: Desktop PC power cable is backed by a lifetime limited warranty. All pcie connectors on a hashing board need to be connected to the psu for the hashboard to operate. Each antminer t9+ requires ten 6-pin pci-e connectors for 12v dc input must be very stable power source There are three hash boards that require three 6-pin PCI-e connectors each and one additional 6-pin PCI-e connector on the controller.

AntMiner T9+ 10.5TH/s @ 0.136W/GH 16nm ASIC Bitcoin & Bitcoin Cash Miner #ad - Built-in web management Portal - No separate Host Computer or Software Required. 6-ft. If using a 110v power source, we recommend purchasing the EVGA SuperNova 1600 G2. 5. Be sure to power on the miner only after all the PCIE connectors are connected to power supply. Do not connect more than one psu to the same hashing board! Separate power supply to control board: there is one additional 6pin PCIe connector on the IO board which must be connected to the PSU to get power.

Hash rate: 19. 3 gh/s variation of ±5% is expected.

More information about Bitmain T9+_10.5T #ad


Similar products



Bitmain AntMiner L3+ ~504MH/s @ 1.6W/MH ASIC Litecoin Miner The BM1485 ASIC chip

#ad
#ad
Bitmain #ad - All nine 6-pin pcI-e connectors are required. High-quality connectors: c13 to 5-15p connectors, 3 x 14 AWG conductors, 15A / 125V rating. Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter. 4. The restocking fees are typically waived in the event that there is a provable failure within the first 30 days.

Hash rate: 19. 3 gh/s variation of ±5% is expected. Not for desk-top use. Built-in web management portal - No separate host computer or software required. Each antminer l3+ requires nine 6-pin pci-e connectors for 12v dc input must be very stable power supply There are four hash boards that require two 6-pin PCI-e connectors each and one additional 6-pin PCI-e connector on the controller.

Bitmain AntMiner L3+ ~504MH/s @ 1.6W/MH ASIC Litecoin Miner The BM1485 ASIC chip #ad - This allows you to extend the length of a PC or peripheral power cord by 6 feet and convert a C14 device into a standard 5-15P. Reliable design: rohs compliant and is UL listed. It recommends use of the APW3++ PSU with the Antminer D3. Power consumption: 1200w at the wall, 93% efficiency, with Bitmain's APW3 PSU, 25°C ambient temp.

Hashing algorithm: X11 Dash and many others. Be sure to power on the miner only after all the PCIE connectors are connected to power supply.

More information about Bitmain #ad


Similar products



AntMiner S9 ~13.0TH/s @ 0.098W/GH 16nm ASIC Bitcoin Miner

#ad
#ad
Antminer S9 #ad - 2. Do not connect more than one psu to the same hashing board! Separate power supply to control board: there is one additional 6pin PCIe connector on the IO board which must be connected to the PSU to get power. Reliable design: rohs compliant and is UL listed. Heavy duty - 14awg: plug computers and peripherals into a standard outlet.

Power supply is not included* if you have 220v-264v power, then Bitmain recommends using the APW3++ power supply. Dimensions: 350mml*135mmW*158mmH 7. Power supply sold separately - AntMiner APW3++ or APW7 Power Supply Recommended. Power supply sold separately - antminer apw3++ power supply recommended if you have 220v+.

AntMiner S9 ~13.0TH/s @ 0.098W/GH 16nm ASIC Bitcoin Miner #ad - Built-in web management portal - No separate host computer or software required. Do not connect more than one PSU to the same hash board to prevent possible damage and instability. Built-in web management Portal - No separate Host Computer or Software Required. All pcie connectors on a hashing board need to be connected to the psu for the hashboard to operate.

Designed for reliability, stability, and longevity. Hash rate: 105th/s ±7%.

More information about Antminer S9 #ad


Similar products



120mm PWM Case Fan Replacement for Bitmain Antminer S3 S5 S5+ S7 S9 T9 L3+, 190CFM, Dual Ball Bearing, 4-Wire 4-Pin Connector Model: FFB1212EHE

#ad
#ad
IMSurQltyPrise FFB1212EHE #ad - Bitcoin mining hash rate: 13. 5th/s ±5%. Power cable: features a c13 receptacle on one end and a standard 5-15P connector on the other end. Evga supernova 1600 g2 recommended if you only have 110-120v power. Ultra strong 120mm case fan with pwm, 190CFM, Dual Ball Bearing for Long Life. Reliable design: rohs compliant and is UL listed.

Rated voltage: 12v dc, current: 3. 0a max, power: 36W Max. Broad scope of application: this super powerful case fan can be replace the damaged fan of Bitmain Antminer S3 S5 S5+ S7 S9 T9 L3+. Etc, cellar, also could be suitable for big PC or Server CPU cooling component, even take big amount of fresh air for enclosed spacelike Garage, Construction Site.

120mm PWM Case Fan Replacement for Bitmain Antminer S3 S5 S5+ S7 S9 T9 L3+, 190CFM, Dual Ball Bearing, 4-Wire 4-Pin Connector Model: FFB1212EHE #ad - . 6-ft. Power consumption: 800W ±10% Power supply sold separately. Also, manufactured in compliance with strict RoHS specifications. Speed: 4000 rpm, noise level: 59 db-a, Air Flow: 190 CFM. Specification: model number: ffb1212ehe bearing: 2 balllong life Remark Function: PWM Rated Voltage: 12V DC Operating Voltage Range: 7-13.

2 v input Current: 3. 0a max input power: 36w max max speed: 4000+/- 10% rpm airflow: 190 cfm noise Levelmax: 59 dBA Power Connector: 4-Wire 4-Pin Wire length: 17.

More information about IMSurQltyPrise FFB1212EHE #ad


Similar products



Heavy Duty Power Cord 220-250v UL 14 AWG 6-15P, Works for BITMAIN Miner APW3++ for Antminer T15, S11, DR5, A3, S9, D3, L3, T9, V9 and Also ETH and Many CryptoCoin Miners

#ad
#ad
Linemak LS-CAB208-250V14AWG #ad - Rated voltage: 12v dc, current: 3. 0a max, power: 36W Max. Power consumption figures will vary with your psu's efficiency, the ambient operating temperature and the accuracy of the power meter. Power consumption: 1273W ±10% Power supply not included. Most power efficient bitcoin Miner: 0098 j/gh ±7%. Hash rate: 19.

3 gh/s variation of ±5% is expected. 14 awg 3 conductor Wire SJT black wire. Do not connect more than one psu to the same hashing board! Separate power supply to control board: there is one additional 6pin PCIe connector on the IO board which must be connected to the PSU to get power. All pcie connectors on a hashing board need to be connected to the psu for the hashboard to operate.

Heavy Duty Power Cord 220-250v UL 14 AWG 6-15P, Works for BITMAIN Miner APW3++ for Antminer T15, S11, DR5, A3, S9, D3, L3, T9, V9 and Also ETH and Many CryptoCoin Miners #ad - Apw3++ on a 220v outlet recommended OR EVGA SuperNova 1600 G2. Most reliable litecoin or other Scrypt-based coin ASIC miner commercially available! Be sure to power on the miner only after all the PCIE connectors are connected to power supply. Power consumption: 1200w at the wall, with Bitmain's APW3 PSU, 93% efficiency, 25°C ambient temp.

Hashing algorithm: X11 Dash and many others. Built-in web management portal - No separate host computer or software required. Evga supernova 1600 g2 recommended if you only have 110-120v power.

More information about Linemak LS-CAB208-250V14AWG #ad


Similar products



Antminer S9 ~14.0TH/s @ .098W/GH 16nm ASIC Bitcoin Miner with Power Supply

#ad
#ad
Bitmain S9 #ad - It recommends use of the APW3++ PSU with the Antminer D3. Built-in web management Portal - No separate Host Computer or Software Required. Works for all asic and gpu miners like t15 s11 dr5 s9, v9, z9, a3, S9i, L3+, d3, s9j, x3, e3, l3++, t9, and all older models. Designed for reliability, stability, and longevity.

Hash rate: 105th/s ±7%. Power consumption: 1450W ±7% Power supply sold separately. Easy to use web interface. Hash rate: 504mh/s ±7%. Heavy duty - 14awg: plug computers and peripherals into a standard outlet. One apw3++ psu can not power more than one Antminer D3. Model number: ffb1212ehe, dimensions: 120*120*38mm, 4-Wire 4-Pin Connector with Speed Sensor.

Antminer S9 ~14.0TH/s @ .098W/GH 16nm ASIC Bitcoin Miner with Power Supply #ad - Built-in web management portal - No separate host computer or software required. Power consumption: 1323W ±10% Power supply not included. Power supply sold separately - antminer apw3++ power supply recommended if you have 220v+. Power consumption: 1273W ±10% Power supply not included. This does not mean there are loose parts and does not mean the item is defective.

The antminer s9 requires TEN 6-pin PCI-e connectors.

More information about Bitmain S9 #ad


Similar products