American Educational 7-G15-A Cast Iron Support Ring Stand with Acid Resistant Finish, 8″ Length x 5″ Width Base Size

#ad
#ad
American Educational 7-G15-A #ad - Available in cast iron. Strong and dependable support. Coated with an acid resistant finish. The rods are nickel plated steel and are threaded to fit the base. Made of cast iron. Type is coated with an acid resistant finish. The rods are nickel plated steel and are threaded to fit the base. Base size: 8" length by 5" width, rod size: 3/8" diameter by 20" length.

Strong and dependable support. Base: 8" length by 5" width; rod: 3/8" diameter by 20" length.

More information about American Educational 7-G15-A #ad

EISCO CH0688 Labs Clamp Retort, 3 PVC Coated Prongs opens to 90mm in dia. with Boss Head

#ad
#ad
EISCO CH0688 #ad - EISCO CH0688 Labs Clamp Retort, 3 PVC Coated Prongs opens to 90mm in dia. with Boss Head #ad - Attaches to rods up to 15 mm in diameter. Die casted alloy clamp retort, PVC coated jaws with boss head which accommodates rods up to 15 mm in diameter. Jaws have a capacity of 90 mm. Pvc coating can withstand heat up to 100c for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses.

. Extends out approximately 5" from rod, not adjustable. Can mount vertical or horizontal -- rotates on clamp.

More information about EISCO CH0688 #ad


Similar products



Eisco Labs Burette/Test Tube Clamp, PVC Coated Round Jaws, Opens up to 45mm in Dia.

#ad
#ad
EISCO #ad - Rods up to 13mm in diameter. Extends out approximately 5" from rod, not adjustable. Rubber lined jaws. Can mount vertical or horizontal -- rotates on clamp. Pvc coating can withstand heat up to 100c for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses. Round clamp features PVC dipped steel jaws which open from 15mm to 45mm.

Eisco Labs Burette/Test Tube Clamp, PVC Coated Round Jaws, Opens up to 45mm in Dia. #ad - The clamp attaches to rods up to 13mm in diameter. Threaded rod and wing nut adjust clamp angle and overall length from 13 to 15cm. 15mm to 45mm opening. Attaches to rods up to 15 mm in diameter. Holds test tubes or burettes.

More information about EISCO #ad


Similar products



OESS Lab Clamp 3 Prong Finger Style Rubber-Coated Head With A Black Laboratory Stand Clip

#ad
#ad
OESS #ad - 3 finger clamp accepts rods up to 20 mm. Can mount vertical or horizontal -- rotates on clamp. Maximum width of Jaw opening is 90mm. 15mm to 45mm opening. 3 prong finger style rubber-coated Head lab clampBlack lab retort stand bosshead clamp holder Attaches to rods up to 15 mm in diameter. Holds test tubes or burettes.

Covered jaws for protection and grip. Sold as 1 pcs 3 finger lab clamp and 1 pcs black lab stand clip. Extends out approximately 5" from rod, not adjustable. Pvc coating can withstand heat up to 100c for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses. Strong die-cast construction.

OESS Lab Clamp 3 Prong Finger Style Rubber-Coated Head With A Black Laboratory Stand Clip #ad - Rubber lined jaws. Rods up to 13mm in diameter.

More information about OESS #ad


Similar products



Lucksender 2pcs 110*60mm Laboratory Flask Cork Stand Lab Supply Article

#ad
#ad
Lucksender #ad - Pvc coating can withstand heat up to 100c for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses. Rubber lined jaws. 3 finger clamp accepts rods up to 20 mm. Rods up to 13mm in diameter. Maximum width of Jaw opening is 90mm. With approx. 30mm thickness. Applied to make a flask stand to prevent falling.

Lucksender 2pcs 110*60mm Laboratory Flask Cork Stand Lab Supply Article #ad - Waterproof and acid-alkli resistant. With approx. 30mm thickness. 15mm to 45mm opening. Can mount vertical or horizontal -- rotates on clamp. Description 110*60mm laboratory flask Cork Stand Lab Supply Article Applied to make a flask stand to prevent falling. Sold as 1 pcs 3 finger lab clamp and 1 pcs black lab stand clip.

Specifications material: cork flask Capacity: 250-1000ml Height: 30mm Inside Diameter: approx. 60mm outside Diameter: approx. 110mm package included 2 x Flask Stand Attaches to rods up to 15 mm in diameter. Strong die-cast construction. Waterproof and acid-alkli resistant.

More information about Lucksender #ad


Similar products



Drillpro 4x4'' Scientific Lab Jack Aluminum Lab Lifting Platform Stand Rack Scissor Lab-Lift Lifter

#ad
#ad
Drillpro DRILLPROTSZYmall2798 #ad - Specifications: material: stainless steel measurements: countertop 100x100mm, under the floor and the rotating shaft, lowest 45mm Structure: Experimental lift by the panel, the highest 160mm, handwheel and other components. Extends out approximately 5" from rod, not adjustable. Can mount vertical or horizontal -- rotates on clamp.

Covered jaws for protection and grip. 30mm thickness. Measurements: countertop 100x100mm, the highest 160mm, lowest 45mm. 3 finger clamp accepts rods up to 20 mm. Material: Stainless steel. Rubber lined jaws. Maintenance: after use, dry, should be kept clean and stored in a cool, non-corrosive gases Package include: 1x Laboratory lifting platform Attaches to rods up to 15 mm in diameter.

Drillpro 4x4'' Scientific Lab Jack Aluminum Lab Lifting Platform Stand Rack Scissor Lab-Lift Lifter #ad - Holds test tubes or burettes. Structure: experimental lift by the panel, under the floor and the rotating shaft, handwheel and other components. How to use: lift place a smooth, rotating the hand wheel to lift on the front panel can be adjusted to the desired height. Maintenance: after use, dry, should be kept clean and stored in a cool, non-corrosive gases.

Rods up to 13mm in diameter.

More information about Drillpro DRILLPROTSZYmall2798 #ad


Similar products



Dinglab,500ml Chemistry Lab Glassware Kit,glass Distilling,distillation Apparatus,24/40

#ad
#ad
Dinglab Ding00002 #ad - 15mm to 45mm opening. Pvc coating can withstand heat up to 100c for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses. Liebig condenser with 10mm dia hose connection, 200mm, 24/40, 10mm hose connection. Vacuum take-off adapter, 24/40 Maximum width of Jaw opening is 90mm.

Holds test tubes or burettes. 500ml chemistry lab glassware kit, distillation Apparatus, Glass Distilling, 24/40 1 SET Attaches to rods up to 15 mm in diameter. Sold as 1 pcs 3 finger lab clamp and 1 pcs black lab stand clip. Material: Stainless steel. Rubber lined jaws. Extends out approximately 5" from rod, not adjustable.

Dinglab,500ml Chemistry Lab Glassware Kit,glass Distilling,distillation Apparatus,24/40 #ad - Structure: experimental lift by the panel, under the floor and the rotating shaft, handwheel and other components. How to use: lift place a smooth, rotating the hand wheel to lift on the front panel can be adjusted to the desired height. Maintenance: after use, should be kept clean and stored in a cool, dry, non-corrosive gases.

Round bottom flask, single neck, 500ml, 24/40. Round bottom flask, single neck. 250ml, 24/40

More information about Dinglab Ding00002 #ad


Similar products



OESS Lab Clamp 3 Prong Finger Style Laboratory 360┬░Swivel Type Rubber-Coated Head

#ad
#ad
OESS #ad - 3 way thermometer adapter with 24/40 joint, 75bend. Material: Stainless steel. Strong die-cast construction. 3 finger clamp accepts rods up to 20 mm. Strong die-cast construction. Sold as 1 pcs 360 degrees swivels 3 finger lab clamp. Pvc coating can withstand heat up to 100c for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses.

Extends out approximately 5" from rod, not adjustable. Can mount vertical or horizontal -- rotates on clamp. Covered jaws for protection and grip. Applied to make a flask stand to prevent falling. Waterproof and acid-alkli resistant. With approx. Maximum width of Jaw opening is 90mm. Covered jaws for protection and grip.

OESS Lab Clamp 3 Prong Finger Style Laboratory 360┬░Swivel Type Rubber-Coated Head #ad - 15mm to 45mm opening. Holds test tubes or burettes. 30mm thickness. Measurements: countertop 100x100mm, the highest 160mm, lowest 45mm.

More information about OESS #ad


Similar products



7pcs PTFE magnetic stirrer mixer stir bar White Color

#ad
#ad
GHH #ad - Can mount vertical or horizontal -- rotates on clamp. These are brand new, never used, PTFE stirrer bars. Length diameter 10mm 5mm 12mm 7mm 20mm 8mm 25mm 7mm 28mm 8mm 30mm 8mm 35mm 9mm Attaches to rods up to 15 mm in diameter. Applied to make a flask stand to prevent falling. Waterproof and acid-alkli resistant.

With approx. Liebig condenser with 10mm dia hose connection, 24/40, 200mm, 10mm hose connection. Vacuum take-off adapter, 24/40 Covered jaws for protection and grip. Maximum width of Jaw opening is 90mm. 3 way thermometer adapter with 24/40 joint, 75bend. Structure: experimental lift by the panel, under the floor and the rotating shaft, handwheel and other components.

7pcs PTFE magnetic stirrer mixer stir bar White Color #ad - How to use: lift place a smooth, rotating the hand wheel to lift on the front panel can be adjusted to the desired height. Maintenance: after use, dry, should be kept clean and stored in a cool, non-corrosive gases. Round bottom flask, 500ml, single neck, 24/40. Round bottom flask, single neck. 250ml, 24/40

3 finger clamp accepts rods up to 20 mm.

More information about GHH #ad


Similar products



Laboy Glass Thermometer Adapter Inlet Adapter With 24/40 Inner Joint For Distillation Apparatus

#ad
#ad
Laboy HMA012103 #ad - Liebig condenser with 10mm dia hose connection, 200mm, 24/40, 10mm hose connection. Vacuum take-off adapter, 24/40 Attaches to rods up to 15 mm in diameter. With 24/40 standard taper inner joint, can be fit for any apparatus with 24/40 outer joint. With a compression a cap. Material: Stainless steel. Can mount vertical or horizontal -- rotates on clamp.

Covered jaws for protection and grip. Holds test tubes or burettes. Ship by epacket with tracking number, take 7-17 days. With 24/40 inner joint. Covered jaws for protection and grip. Pvc coating can withstand heat up to 100c for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses.

Laboy Glass Thermometer Adapter Inlet Adapter With 24/40 Inner Joint For Distillation Apparatus #ad - With a compression cap accomodates 5. 0-7. 5mm O. D. Thermomter use it as a syringe port. Structure: experimental lift by the panel, under the floor and the rotating shaft, handwheel and other components. How to use: lift place a smooth, rotating the hand wheel to lift on the front panel can be adjusted to the desired height.

More information about Laboy HMA012103 #ad


Similar products



American Educational Borosilicate Glass 25mL Burette, with PTFE Stopcock

#ad
#ad
American Educational 7-208-3 #ad - Made by hand blowing. 30mm thickness. Measurements: countertop 100x100mm, the highest 160mm, lowest 45mm. Material: Stainless steel. Holds test tubes or burettes. Maximum width of Jaw opening is 90mm. Rubber lined jaws. Extends out approximately 5" from rod, not adjustable. Pvc coating can withstand heat up to 100c for short periods of time but it is recommended you remove the PVC coating for extreme temperature uses.

American Educational Borosilicate Glass 25mL Burette, with PTFE Stopcock #ad - 3 way thermometer adapter with 24/40 joint, 75bend. 25ml Capacity. Ship by epacket with tracking number, take 7-17 days. With 24/40 inner joint. With a compression a cap. Liebig condenser with 10mm dia hose connection, 200mm, 24/40, 10mm hose connection. Vacuum take-off adapter, 24/403 finger clamp accepts rods up to 20 mm.

25ml Capacity. Sold as 1 pcs 3 finger lab clamp and 1 pcs black lab stand clip. Maximum width of Jaw opening is 90mm. Sub.

More information about American Educational 7-208-3 #ad


Similar products